| |
 |
| |
If you select SKM LOG SHEAR SYSTEM
1. Your company can improve 7% of extruding product rate.
1) By exact cutting of billet size ,& it minimize the butt size and improves 4% of extruding product rate.
2) By using long billt, It increase 1% cutting rate because of not caused the cutting chip.
3) It increases 3 % of extruding product rate since using long billet that is cutting through double cutting process.
2. Maintaining the log billet, it saves capital because no need to maintain the different kinds of short billet by length.
3. It is possible to control of exact billet temperature management since by heating after measuring the
surface temperature in 3~5 zones. |
| |
|
4. The energy efficiency is over 50% because of by rapid heating method .
5. Brushing machine improves the quality by removing the oxygen layer of surface the log.
6. It doesn't need to early out process since it makes possible to supplying the hot billet just after heating 10min in
the beginning working stage.
|
| |
|
| A(BILLET D) |
B(BILLET L) |
C |
D |
E |
F |
G |
H |
I |
MAX (kg/Hr) |
|
| 5"(Ø127) |
300~510 |
9,100 |
6,300 |
800 |
1,500 |
19,450 |
2,000 |
1,000 |
800 |
|
| 6"(Ø152.4) |
350~610 |
9,200 |
7,300 |
800 |
1,500 |
20,550 |
2,000 |
1,000 |
1,200~1,500 |
|
| 7"(Ø177.8) |
400~750 |
9,500 |
9,300 |
900 |
1,650 |
23,100 |
2,000 |
1,000 |
2,000 |
|
| 8"(Ø203.2) |
450~800 |
9,600 |
10,400 |
900 |
1,650 |
24,210 |
2,100 |
1,050 |
2,500 |
|
| 9"(Ø228.6) |
500~950 |
10,000 |
11,400 |
1,100 |
1,900 |
26,150 |
2,100 |
1,050 |
3,000 |
|
| 10"(Ø254) |
600~1,000 |
10,000 |
11,400 |
1,100 |
1,900 |
26,150 |
2,200 |
1,100 |
3,000 |
|
| 11"(Ø279.4) |
600~1,200 |
10,400 |
11,400 |
1,300 |
2,100 |
26,950 |
2,200 |
1,100 |
3,000 |
|
| 12"(Ø304.8) |
600~1,200 |
10,400 |
12,400 |
1,300 |
2,100 |
26,950 |
2,200 |
1,200 |
3,500 |
|
|
| |
 |
| |
Log heater
1) As the heat exchanger increase the combustion air temperature up to 200~300℃ through pre-heating efficiency is
effective and can decrease the consumption of fuel.
2) It is minimize to loss the heat by making airtight completely for door.
3) It is extended for life of thermocouple with installing the damper. |
| |
|
| |
Log shear
1) The maintenance and repairing procedure is very easy due to the horizontal cutting system different to the
vertical cutting system.
2) With installing the circle cramp at the in and out way, the cutting part has no variety and clear.
3) The cutting time is decreased with applying the operation circuit set on cutting cylinder
( Standard -10second, SKM 6Second )
4) The soot device are able to omit the lubrication operation. |
| |
|
| |
LOG DECK * LOG PUSHER
Log deck : It is possible to decrease the impact and vibration in favor of the chain conveyor type.
Log pusher : As the hydraulic motor supplying the power to the log pusher is operated by proportion V/V control system, operation of Log pusher is very smooth and accurate for location control.
|
| |
|
| |
BRUSHING MACHING
The alien substance can be removed clearly from the surface of log..
|
| |
|
| |
| |
PC CONTROL SYSTEM
1) It is possible for control panel to do the remote control system to connect to the Internet line
2) The P/C system apply to control panel, so monitor display the data on the machine trouble, production quantity and
length of billet.
|
| |
 |
| |
 |
| |
 |
| |
|
|
|
| |
|
|
 |
Product 
